Title reads like at ad, but this is a new way to reach energy independence. I actually have a small EcoFlow device and it’s pretty good for the price.

I hope this tech can be made available in the US soon.

    • MinorLaceration@lemmy.world
      link
      fedilink
      English
      arrow-up
      19
      arrow-down
      1
      ·
      1 month ago

      They don’t follow the grid frequency because the EU or US regulations require it, they follow the grid frequency because physics demands it.

          • Pretzilla@lemmy.world
            link
            fedilink
            English
            arrow-up
            1
            ·
            edit-2
            1 month ago

            I think I get that, thanks. So an Island grid is less stable and could cause itself damage if two microinverters say are trying to sync up to each other vs a beefy, stable main grid?

            So how does a backup battery system work when islanded? Typically also at 52Hz?

            Or can it go into a 60Hz beefy mode?

            It would be nice to get all the little island solar inverters working when the grid goes down!

            • skyspydude1@lemmy.world
              link
              fedilink
              English
              arrow-up
              1
              ·
              1 month ago

              I’m guessing the commenter above is in the EU and operating at 50Hz normally, so running at 60Hz wouldn’t be a great idea. A backup battery and such operate in the same way when islanding.

                • skyspydude1@lemmy.world
                  link
                  fedilink
                  English
                  arrow-up
                  1
                  ·
                  1 month ago

                  IIRC some inverters are able to sync up with alternative power sources, but the documentation is extremely limited and seems to be reserved mostly for large-scale systems. I know my Solaredge system has slowly been implementing using both at the same time, but the documentation is pretty unclear as to how this works. I know at the very least it’ll allow you to use a 2-wire start to kick a standalone generator on when the batteries are low, but don’t know much else about how it’s currently set up