It turns out I can do fuckall with my nh-d15 on my new setup. GPU wont fit full stop. Im very skeptical with trying to purchase nh-d15s this time around, as Im pretty sure I wont be able to use the offset mounting kit for it without running into the same issues that need that cooler to begin with.

Is there a cooler that is just straight up for am5 and cools like a champ? No fucking around with offsets and such. Can be AIO for all I care.

  • Telorand@reddthat.com
    link
    fedilink
    arrow-up
    2
    ·
    8 months ago

    I don’t have experience with AM5, but I wonder if the U12A would fit. It’s like a D15 that is built around 120mm fans instead of 140mm. Another option might be the C14S. It is a solid downdraft cooler that also has an offset, iirc.

    • Bondrewd@lemmy.worldOP
      link
      fedilink
      arrow-up
      2
      arrow-down
      1
      ·
      edit-2
      8 months ago

      Turns out even U12A hangs over! There is no usable air cooler that I would put on a 600$ motherboard with a 600$ CPU. Even nh-d15s hangs over! What the fuck?!

      Ended up buying Arctic Liquid Freezer II 420 for considerably cheaper than nh-d15. Get this: it has the offset ability as well.

      • Telorand@reddthat.com
        link
        fedilink
        arrow-up
        1
        ·
        8 months ago

        Turns out even U12A hangs over!

        Bro, are you building ITX? 😂

        Glad you found a cooler that works. I have an ITX build, so I know first hand the difficulty of finding parts that fit.

        • Bondrewd@lemmy.worldOP
          link
          fedilink
          arrow-up
          1
          ·
          edit-2
          8 months ago

          Asus x670e gene is an M-ATX board but it is geared towards overclocking. They probably didnt take air coolers into account. It only has one x16 reeally close to the CPU. Also the ONLY PCIE-5 M-ATX board in europe.

          I didnt expect this at all.

          • Telorand@reddthat.com
            link
            fedilink
            arrow-up
            0
            ·
            8 months ago

            That’s good that the x16 is so close to the CPU, even though it’s been a headache. Physical distance does affect its performance (though by how much, I can’t say).

  • wax@lemmy.wtf
    link
    fedilink
    arrow-up
    1
    ·
    7 months ago

    Noctua has a pretty decent compatibility list. You can plug in your motherboard and get compatible coolers

    • Bondrewd@lemmy.worldOP
      link
      fedilink
      arrow-up
      1
      arrow-down
      2
      ·
      7 months ago

      Yeah I ended up taking a peek. Literally NOTHING was compatible that I would put on a 7950x3d. It has such a miniscule headroom, not even the nh-d15s, or even some of their smaller coolers would go on it. Ended up with Arctic Liquid Freezer II 420.

      • wax@lemmy.wtf
        link
        fedilink
        arrow-up
        1
        ·
        7 months ago

        Been looking at matx boards recently, and the MSI boards seem to have their first pcie slot a bit lower than the others

        • Bondrewd@lemmy.worldOP
          link
          fedilink
          arrow-up
          1
          arrow-down
          2
          ·
          7 months ago

          Not really an option to swap at this point anymore. Well whatever, Im more satisfied with the cooling abilities of the AIO anyway.