Fixed by using grub.

Error when trying to boot into new install. ERROR: device ' ' not found. Skipping fsck. :: mounting ' ' on real root mount : /new_root: no valid filesystem type specified. ERROR: Failed to mount ' ' on real root And I’m getting dropped in emergency shell. I used official wiki, used refind as bootloader. Second time I tried installing and got same error.
Edit1: fstab
`#/dev/nvme0n1p2
UUID=4dae009f-c08f-4636-b1b5-85a4713a6f40 / ext4 rw,relatime 0 1

#/dev/nvme0n1p1
UUID=0019-78B6 /boot vfat rw,relatime, fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,utf8,errors=remount-ro 0 2 `
p2 is root partition
p1 is efi partition.

Edit2: running timedatectl in chroot returns System has not been booted with systemd as init system (PID 1). Can't operate. Failed to connect to bus: Host is down

    • Nibodhika@lemmy.world
      link
      fedilink
      arrow-up
      2
      ·
      edit-2
      11 months ago

      Have you mounted /boot? Usually it’s in a different partition so you’ll need to mount it.

      Edit: yup, your boot is in a different partition according to your fstab

        • Nibodhika@lemmy.world
          link
          fedilink
          arrow-up
          4
          ·
          edit-2
          11 months ago

          Every time I made this mistake I booted again the live iso, mounted the boot drive and edit it.

          Edit: you can also just edit the entry on refind directly to boot once on a correct config, and then fix it inside your actual system. The error is that the root filesystem will have an uuid that relates to the live iso image, not to your actual system.

            • Nibodhika@lemmy.world
              link
              fedilink
              arrow-up
              3
              ·
              edit-2
              11 months ago

              Ok, if I understood correctly your fstab what you should do is:

              1. Boot the live iso
              2. Run mount /dev/nvme0n1p1 /mnt
              3. run nano /mnt/refind_linux.conf
              4. Alter the file so it says this:
              "Boot with standard options"  "rw root=/dev/nvme0n1p2"
              "Boot to single-user mode"    "rw root=/dev/nvme0n1p2 single"
              "Boot with minimal options"   "ro root=/dev/nvme0n1p2"
              
              1. Save and close
              2. Unmount the drive umount /mnt
              3. Reboot

              That should work

              Edit: noticed my disk was 1 while yours is 0, didn’t remembered I had two ssds on that machine hahahah

              Edit2: check that the file exists in /mnt, it should if you ran refind-install the first time.

                • Nibodhika@lemmy.world
                  link
                  fedilink
                  arrow-up
                  1
                  ·
                  11 months ago

                  Did you confirm that the file existed before editing? And that you were mounting the correct boot and not root partition?

                  I don’t know what else it can be if that doesn’t solve it.