Happens all the time. I used to work in a factory that worked with metal and after the pieces were painted, we were supposed to test the paint’s thickness with a tool. You press sort of a pen on different parts of the piece and the screen gives you the average thickness. It was supposed to be within a certain set of tolerance.
I test my first piece and notice that the no matter where I test, the average is way above the tolerance limits. I ask around about what we should do and they tell me don’t worry about it, just put whatever number that’s within the tolerance limit.
Almost none of our pieces were within tolerance. Thankfully it wasn’t for anything as crucial as submarine steel, but still.
Delphin as in the Soviet Delta IV series SSBN. I would never much NOT trust the 1903 Imperial Russian Delphin submarine.
Also dang, I knew that sounded off. I couldn’t remember if Ohio or Los Angeles were the ballistic platform.
Botched steel aside, something tells me that those submarines would preform leagues better then this decrepit jerryrigged mess. Hell, in a worst case scenario, an Ohio or Los Angeles has dozens of bulkheads, emergency rooms, emergency surface launchers, and safety measures to stay alive until rescue arrives. If this disaster as much as springs a leak… good luck.
I have no idea why anyone that isn’t deranged would ever trust their life to this contraption. You couldn’t pay me to man that wreck.
I have no idea why anyone that isn’t deranged would ever trust their life to this contraption.
And yet, Elon Musk’s shit tunnel thing is basically the same thing but on land—a subsurface transport system with no escape should something to wrong (which it definitely will, given enough time).
About that…
Also, Los Angeles class is SSN, not SSBN. Which Delphin you mean? It has to be most common name for submarines ever.
Happens all the time. I used to work in a factory that worked with metal and after the pieces were painted, we were supposed to test the paint’s thickness with a tool. You press sort of a pen on different parts of the piece and the screen gives you the average thickness. It was supposed to be within a certain set of tolerance.
I test my first piece and notice that the no matter where I test, the average is way above the tolerance limits. I ask around about what we should do and they tell me don’t worry about it, just put whatever number that’s within the tolerance limit.
Almost none of our pieces were within tolerance. Thankfully it wasn’t for anything as crucial as submarine steel, but still.
Did you report them after ceasing your employment? This could’ve hypothetically caused deaths or else. :/
Delphin as in the Soviet Delta IV series SSBN. I would never much NOT trust the 1903 Imperial Russian Delphin submarine.
Also dang, I knew that sounded off. I couldn’t remember if Ohio or Los Angeles were the ballistic platform.
Botched steel aside, something tells me that those submarines would preform leagues better then this decrepit jerryrigged mess. Hell, in a worst case scenario, an Ohio or Los Angeles has dozens of bulkheads, emergency rooms, emergency surface launchers, and safety measures to stay alive until rescue arrives. If this disaster as much as springs a leak… good luck.
I have no idea why anyone that isn’t deranged would ever trust their life to this contraption. You couldn’t pay me to man that wreck.
And yet, Elon Musk’s shit tunnel thing is basically the same thing but on land—a subsurface transport system with no escape should something to wrong (which it definitely will, given enough time).
Murphy’s law: anything that can happen will happen
The article you linked is locked behind a paywall
Try this one.
Thx