• pixelprimer@lemmy.worldOP
      link
      fedilink
      English
      arrow-up
      0
      ·
      1 year ago

      Yeah it was my first time with QMK as well. You can try emailing the creator they are really nice.

      You need to you need to use git to clone his branch of QMK then follow GMKs instructions to make the build enviroment. Once you have that setup run the make command. Then to flash the firmware you hold down the boot button while plugging in the keyboard. Just drag the uf2 file into the microcontrollers drive that shows up.

  • MrPear@lemmy.world
    link
    fedilink
    English
    arrow-up
    0
    ·
    1 year ago

    It looks great! How much were the total costs? I’m considering building something similar

    • pixelprimer@lemmy.worldOP
      link
      fedilink
      English
      arrow-up
      1
      ·
      1 year ago

      I’m in Australia so this will be in AUD with Australian shipping.

      I got the PCB’s from JLPCB for $23.85

      The keycaps diodes microcrontroller switches etc came to $50.17 total. I just used the ones linked in the github, as well as probably knockoff holy pandas and a knockoff soya milk set? They were both super cheap hahah.

      So that’s $73.22 AUD total, so a bit less than $50 USD!

      https://github.com/tompi/cheapino

      I’ve done some soldering in the past but never built a keyboard or anything like this. I was quite nervous but it was quite easy! Hardest part was making sure the switches were straight, but following the build guides tips I managed to do that pretty well (better on the right half then the left half I tried first hahaha.) Highly recommend this keyboard and project.

      Really happy with the end result, I plan on building a Charybdis nano or Flow36 in the future to replace my trackball mouse but this is a great first step.