#3 for me

As people have already said, yes that is a Metro. The converter is supposed to be opaque, and you will need to guestimate. It’s not just guesstimating how much ink you have left, it’s also guesstimating if you have filled the pen to the maximum possible. The ink does not get sucked up into the pen as quickly as a piston mechanism, and it’s impossible to see if you have a max fill. A couple of tips since this is your first squeeze converter. I usually squeeze the air completely out before I dunk it into the ink to remove the potential of a few drops of ink popping out of the bottle (especially for Noodler’s and the bottles filled to the absolute max policy). I also leave it in an extra second or two after it seems fully puffed up just to make sure the maximum amount of ink is sucked up. Luckily, this is all much easier with the Metropolitan’s cheaper squeeze filler design. The “premium” one that came with my Cavalier was encased in a metal tube. The squeeze bar was manipulated using a “button” located near the top which made it very difficult to fully compress the sac and see if the sac was completely puffed up. Terrible design.

It’s pricy, but have you considered a Big Idea Design Pocket Tool? There is a flat head screwdriver side that is not sharp at all, but can still work as a pry bar or a scraper in a pinch. If you are ok with it, it also comes with a dull insert that is good enough to open packages. The other side is kind of a camp fork that looks a lot less aggressive. Otherwise, just leave the insert at home. You’ll still have a flat head screwdriver and a wrench at least. It’s designed to take any old notched utility knife blade.

I started carrying mines regularly in places I can’t carry around a pocket knife or a multitool with a blade.

Sounds like a dud. What surprises me was that reseating the nib made the pen work for a while, and then the pen stopped working suddenly.

A few troubleshooting questions: Have you tried a different ink? How about a different cartridge?

put a sheet of paper/napkin/tissue on the top of the slit. Are you getting any ink? Or is it dry? If it’s wet, it might be something preventing the ink getting to the tip of the nib In this case, I usually try a different ink or gently adjust the tines in the case the tines are too far apart. If it’s dry, I reckon it’s more to do with how the nib is sitting on the feed. The best you probably can do is try to reseat the nib/feed.

This one will be messy. With the pen stored nib down with in the cartridge, wait like 20 minutes. Now pop off the nib and dab at the feed with paper/napkin/tissue. Is the feed saturated with ink? If it’s saturated, once again it’s probably something to do with how the nib is sitting on the feed. Reseat it and hope for the best. If it’s dry, I really don’t know what to suggest besides binning the pen. A Metro isn’t worth enough money to buy a Kakuno just to transfer the feed over.

I am another second brain and school type user. I am less heavy into the second brain part though.

My school notes are from my current program of study. I keep my undergrad notes in a separate vault. I find I rarely need to dip in there, so I keep it separate as not to clutter my main vault.

I slack a bit with the second brain, but it has saved my rear more than once. I follow a lot of Tiago can’t remember his last name at the moment’s second brain approach with some extra ideas I have collected over the years. I generally use it for: Reminders for where I stored items that might be important in the future that I don’t regularly use. Interesting quotes I collect over time. My calendar archives. Lists of things I would recommend to people. How to manuals for things I will need to do that I rarely need to do but is still important. Receipt database for large purchases with warranties. A networking/contact list that reminds me how I know know people, traditional contact information, and important information that I might not remember long term but will be helpful for things like gift ideas, food preferences for restaurant suggestions, remembering the content of networking “interviews” and things like that. Brainstorms for future projects I might be interested in doing. Storing important information for current projects, and so forth.

I don’t use linking as much as I should. The fancy connection charts are usually just for school.

I keep a pocket notebook and a part Bullet Journal, part commonplace book on my desk to dump information over the day. Every evenining or morning, I will copy over my days to do list and habits for the day so I can give some thought about what needs to get done, what to do list tasks that need to be trimmed, and help me plan my day a little. Once in a while (depending how busy/lazy I am), I will go back, decide what is important enough to keep and let the rest to languish in the notebook. The pocket note is quick notes and anything else that doesn’t need to go into my to do list or calendar. If it’s worth keeping, it either goes into the main notebook or my to-do list. I also do a weekly and a monthly check in to figure out what needs to get done this week/month. I admit, there is a lot of repetition in my process. Usually, I rarely spend more than 3-10 minutes on anything in the process, but the process makes me more mindful about what needs to be done and what is actually important. Most importantly, it allows me to search and pull up stuff quickly instead of flipping through page after page of the desk journal.

I give this pen a hearty +1. I have owned, sold, and given away a lot of 30$USD and below pens in the last decade. The 601 and Lamy Safari (and technically a brass Kaweco Sport if that counts) are the only pens in this budget I have kept. The 601 is my off the beaten path recommendation beside the usual suspects of beginner pens. The pen’s capacity in a very pleasant body is the big selling point for me. The filling system is neat, and the use of a O-ring type piston (is that the technical term?) like the one found in a piston filler over the latex used in the original 601 model is an excellent upgrade in my opinion. For people who throw around their pens, the plastic isn’t the toughest thing in the world, but I think your metal version solves that problem.

The hooded nib is great for slowing dry out too!

My question to you is how the balance on the metal version, especially when posted? The plastic grip worries me a little.