For example, I’m sure the average joe doesn’t know just how expensive calligraphy pens can be, or how deep the rabbit hole goes on video game speedruns.

  • nottheengineer@feddit.de
    link
    fedilink
    arrow-up
    112
    arrow-down
    1
    ·
    1 year ago

    Keyboards are generally known about, but the ergo part of it is a rabbit hole within the rabbit hole. Some people literally design, 3D print, wire up, solder and program one-off keyboards because they don’t like the ones made by other people.

        • Davel23@kbin.social
          link
          fedilink
          arrow-up
          10
          ·
          1 year ago

          Steno machines are also “chorded”, and they type in a form of shorthand where sounds, words, and phrases can be represented by just a few characters. My guess is that given equal skill levels, a steno machine would still be faster.

        • Literati@lemmy.world
          link
          fedilink
          arrow-up
          6
          ·
          edit-2
          1 year ago

          Stenographers usually use something pretty similar so I doubt it. The ones I’ve seen (to be fair, live captioners, not stenographers) use something that’s closer to a piano than a normal keyboard, and it types full words rather than letters, but also has a regular typing functionality. Pretty cool to watch honestly.

        • dustyData@lemmy.world
          link
          fedilink
          English
          arrow-up
          4
          arrow-down
          1
          ·
          1 year ago

          No way. Stenographers can transcribe speech live. Some have been timed at close to 400 wpm. While the top chorded typing is closer to 250wpm. Good, but nowhere close to a stenotype. Both are pretty ridiculously fast though. A pretty fast typist can barely approach 100.

        • demesisx@infosec.pub
          link
          fedilink
          English
          arrow-up
          14
          arrow-down
          1
          ·
          1 year ago

          Not yet but I am seriously considering building a badass ergo keyboard at some point once I see a good enough design to copy.

      • nottheengineer@feddit.de
        link
        fedilink
        arrow-up
        5
        ·
        1 year ago

        I switched to colemak-DH a while ago and it’s been great. Much more comfortable than QWERTY even on a standard keyboard.

      • CapnMoisesBKind@sh.itjust.works
        link
        fedilink
        arrow-up
        4
        ·
        1 year ago

        Oh my gosh, I searched it and it looks hard to use but once you get good, you can type faster than the fastest typist using a regular keyboard.

        Interesting!

      • flubba86@lemmy.world
        link
        fedilink
        arrow-up
        3
        ·
        1 year ago

        They were/are one of the largest enthusiast groups on Reddit, so it makes sense they have a large presence on Lemmy too.

    • synclair1@lemmy.world
      link
      fedilink
      arrow-up
      8
      ·
      1 year ago

      I did exactly this! It was super fun! Ergodox keyboard is very expensive. I spent about $40 on my custom one. It works great too :)

      • flubba86@lemmy.world
        link
        fedilink
        arrow-up
        7
        ·
        1 year ago

        How did you spend only $40 on a custom ergo? When I built mine, I 3d printed the cases myself, but it’s still $30 for cheap key switches, $20 for cheap keycaps, $20 for a pro micro, and at least $40 for PCBs,unless you handwire.

        Or did you reuse existing switches and keycaps?

        • synclair1@lemmy.world
          link
          fedilink
          arrow-up
          5
          ·
          1 year ago

          Sorry, forgot to mention, I handwired and reused key caps. I have a lot of extra sets from liking keyboards for a while lol.

          I also used a pi pico which took some extra tlc but saved a good chunk of money (1 pico is 7 dollars and only one is necessary).

          • dustyData@lemmy.world
            link
            fedilink
            English
            arrow-up
            7
            ·
            edit-2
            1 year ago

            The DIY fallacy. “You can do this yourself for just $20. You only need some string, a plastic bottle cap. And $5k of equipment and materials that have accumulated in your garage from around a decade of on and off hobbyist hoarding. Then you too can own a solar powered battery 3D printed fusion ferromagnetic screwdriver.”

            • synclair1@lemmy.world
              link
              fedilink
              arrow-up
              1
              ·
              1 year ago

              I get it, but to be fair, the keycaps I already had were only about $20 on Amazon. So if you want to be pedantic I spent $60 total. Still beats the $300 plus for the ergodox. Also, if you really want to get into it, it took me around 25 hours to fully complete since I opted to hand wire. So factor in whatever your hourly rate is times 25 hours to get the opportunity cost of the diy job. Maybe you’re right and it just makes sense to buy the darn thing. At least I had fun though.

              • dustyData@lemmy.world
                link
                fedilink
                English
                arrow-up
                1
                ·
                1 year ago

                Most people don’t even own a soldering iron to wire it all. That’s another $20 right there. Just, it’s fine to say DIY is about the fun. And by all means, anyone who wants to have fun tinkering with some tech, go ahead, it’s a blast. But it’s never about the money. It’s disingenuous to tell people, “Oh I did this $300 at retail machine for $10”. No, you didn’t, you are just doing creative accounting and failing to report previous expenses. Because if it could be done for $10, big manufacturers would be doing it for $7, because they have the advantage of economics of scale.

      • nottheengineer@feddit.de
        link
        fedilink
        arrow-up
        2
        ·
        1 year ago

        There used to be smaller keyboards. Chyrosran22 reviewed one from the 80s, but I can’t find the video right now. Maybe someone else remembers the model.

      • Silvus@lemmy.world
        link
        fedilink
        arrow-up
        2
        ·
        1 year ago

        check out Drops Preonic. because it is ortho, all the keys are much closer together. I have one at home and at work.

    • Zak8022@artemis.camp
      link
      fedilink
      arrow-up
      4
      ·
      1 year ago

      The nice thing is that it’s possible to find your “endgame” where you are satisfied without spending a TON. I’m happy with my Drop ALT, stock key caps, and Zeal Zilent v2s. Mind you that was my 3rd or 4th board of varying “depth” in the scene. 🤣

  • Dharma Curious@startrek.website
    link
    fedilink
    arrow-up
    75
    ·
    1 year ago

    Maybe not as expensive as the others, but crochet/knitting/sewing all start off fairly cheap, and then the next thing you know you’re offering to service old men behind a Joann’s fabric because you need this particular fabric and you need an entire bolt of it, and it’s the one fabric in the entire fucking store that isn’t on their amazing buy one get 73 free sale for the week.

    • FauxPseudo @lemmy.world
      link
      fedilink
      arrow-up
      44
      ·
      1 year ago

      Nothing like spending $100 and 80 hours on a pair of socks for yourself because they don’t sell the ones you want.

      got socks?

      • Dharma Curious@startrek.website
        link
        fedilink
        arrow-up
        12
        ·
        1 year ago

        Those are gorgeous though. I don’t have the skill to do anything like that yet. I’m mainly stuck on sleep masks and warshrags. Haha. That cabling looks amazing

      • Ticktok@lemmy.one
        link
        fedilink
        English
        arrow-up
        10
        ·
        1 year ago

        I feel like there’s a collision of fetishes here about to start paying for your yarn habit.

      • SheerDumbLuck@lemmy.ca
        link
        fedilink
        English
        arrow-up
        8
        ·
        1 year ago

        Do you have a link to this pattern? I like the heel here and I don’t love the one I currently use.

        • FauxPseudo @lemmy.world
          link
          fedilink
          arrow-up
          6
          ·
          1 year ago

          Pattern? No, I never use patterns. The heal is a standard “afterthought heal”. You can find instructions on YouTube and other sites. It is my favorite heal and the easiest to darn when the time comes.

          When doing socks I do a test swatch to figure out my stitches per in for rows and columns. Then the rest is all math. Once I finished the first I just started cabling the top of the foot. When I got to the ankle I started cabling all the way around. I kept going until they were as high as I wanted them.

          When I learned to knit my instructor was pissed by the end of the fist days lessons because I had knitted several things with no patterns. “How do you know what to do?” “Math.”

          • SheerDumbLuck@lemmy.ca
            link
            fedilink
            English
            arrow-up
            2
            ·
            1 year ago

            Thank you so much for the name of it! I’m a beginner and only knit the same socks over and over again. I have been experimenting with different sock patterns without a guide, but not the heel construction.

      • Dharma Curious@startrek.website
        link
        fedilink
        arrow-up
        11
        ·
        1 year ago

        It’s a wonderful habit! Don’t listen to me. Haha. Fiber crafts are seriously awesome. I’m a total novice at crochet, an intermediate knitter (Portuguese style), and I sew half way well. It’s so much fun, and so worth it. … Just read your coupons carefully.

        • gothicdecadence@lemm.ee
          link
          fedilink
          arrow-up
          3
          ·
          1 year ago

          After one project I’m already feeling that about the coupons 🙃 But it’s really fun and I enjoy it a lot! I can’t wait to dive deeper into it

      • kras@lemmy.world
        link
        fedilink
        arrow-up
        6
        ·
        1 year ago

        Its so good. I’d recommend you get cotton yarn. It tends to fray less than acrylic and easier to get your hook in and see stitches. Also, amigurumi for making toys is really cool.

        • gothicdecadence@lemm.ee
          link
          fedilink
          arrow-up
          4
          ·
          1 year ago

          There’s so many options for amigurumi I don’t know where to start! I just need to pick something and go with it haha

    • landsharkkidd@aussie.zone
      link
      fedilink
      English
      arrow-up
      9
      ·
      1 year ago

      Yep! Especially buying like ethically sourced yarn and stuff. It’s why I buy acrylic yarn because buying yarn from local dyers is difficult as.

      • Dharma Curious@startrek.website
        link
        fedilink
        arrow-up
        8
        ·
        1 year ago

        Same boat. I’m poor as fuck. I hate that I make so many decisions to buy things I know aren’t the option ethically, and that applies so hard to yarn. Really anything in the textiles industry. I try not to buy animal fiber at all unless it’s thrifted.

    • MissJinx@lemmy.world
      link
      fedilink
      arrow-up
      9
      ·
      edit-2
      1 year ago

      The problem is not the price of the yarn, the problem is that none of us have self control and will hoard thousands of dolars in yarn in a closet and not use it because “it’s too pretty I need the perfect project for it”.

      …and then we go out and buy more yarn

  • jackoneill@lemmy.world
    link
    fedilink
    arrow-up
    59
    arrow-down
    2
    ·
    1 year ago

    3D printing! You can start out cheap but you can get STUPID expensive, and it’s the biggest most meandering rabbit hole I know of

    • Squids@sopuli.xyz
      link
      fedilink
      English
      arrow-up
      11
      ·
      1 year ago

      It’s expensive, but it’s also expensive in lots of different avenues. It’s not like you can just go “well I’ll never buy a big pre-built proprietary printer then I’ll just make it myself! Open source forever!” Because that’s the road to leads to sourcing and building your own voron from scratch and spending a thousand dollars on parts

      • enigmara@lemmy.world
        link
        fedilink
        arrow-up
        2
        ·
        1 year ago

        Because that’s the road to leads to sourcing and building your own voron from scratch and spending a thousand dollars on parts

        Looks at my 2.4 sitting on my workbench.

        Can confirm, that’s exactly how it happened. 😬

    • ikidd@lemmy.world
      link
      fedilink
      English
      arrow-up
      5
      ·
      1 year ago

      I’ve been amazed at how cheap it’s become since I built my first few printers. I spent thousands building printers that aren’t half as good as a $300 printer today.

    • /home/pineapplelover@lemm.ee
      link
      fedilink
      arrow-up
      3
      ·
      1 year ago

      I just bought an elegoo neptune 4 pro and thought about buying more filament already. Hopefully it will only be filament and not more machines or something

    • GrayBackgroundMusic@lemm.ee
      link
      fedilink
      arrow-up
      3
      ·
      1 year ago

      And getting consistent prints at a decent speed can be challenging! (Slow and good vs fast and unreliable is a common choice.)

      • EddoWagt@feddit.nl
        link
        fedilink
        arrow-up
        1
        ·
        1 year ago

        I can highly recommend the Klipper firmware if you haven’t already, I can print at much higher speeds than marlin firmware and the print quality is actually better

    • Aux@lemmy.world
      link
      fedilink
      arrow-up
      3
      arrow-down
      1
      ·
      1 year ago

      3D printing can be expensive, but I disagree that it is stupid expensive.

    • EddoWagt@feddit.nl
      link
      fedilink
      arrow-up
      2
      ·
      1 year ago

      3D printing really isn’t expensive, especially since you can create a lot of stuff for cents. I’m considering a new extruder for my Ender 3 (Looking at the LDO orbiter v2) and that’s €70, which sounds expensive for the printer, but compared to any other hobby that’s peanuts

      • swordsmanluke@programming.dev
        link
        fedilink
        arrow-up
        3
        ·
        1 year ago

        It can get expensive - especially if you start looking into high-end / commercial quality printers.

        …or if you burn through 3 reels of TPU just to get one goddamn wrist rest to print. 😩

      • Aux@lemmy.world
        link
        fedilink
        arrow-up
        1
        arrow-down
        1
        ·
        1 year ago

        Yeah, €70 is not much for an upgrade for a hobby. That’s the price of a mid-range chain for a mountain bike and chains are not upgrades, they’re consumables, which you buy at least once a year, lol.

  • PapaTorque@lemmy.world
    link
    fedilink
    arrow-up
    53
    ·
    1 year ago

    Gymnastics. The skill part is obvious but monetarily its more than i expected. I thought it would be like going to a regular gym but its usually much more expensive to use the gyms and thats if you can find a time slot where adult males can train.

  • CustodialTeapot@lemmy.world
    link
    fedilink
    arrow-up
    51
    arrow-down
    1
    ·
    1 year ago

    Magic: the gathering.

    There’s several different styles of play known as “formats”.

    The Cheapest being “Standard”. Which is the latest 3-5 sets released. The deck of 75 card deck can cost upwards of £500.

    Then the most popular format, modern, which is the last 20ish years of release. The average deck there can be upwards of £1,500.

    Then there’s legacy and vintage where decks are in the high 4 figures and some even in the 5 figures.

    • ✨Abigail Watson✨@lemmy.blahaj.zone
      link
      fedilink
      arrow-up
      30
      arrow-down
      1
      ·
      1 year ago

      My roommate is big into magic, but he refuses to spend a lot of money on it. He makes counterfeit cards of whatever he wants and gets a deck custom printed for $40. He’s also part of a discord group that makes cool fake cards or changes artwork on existing ones.

      They’re not allowed to have the official back but since he uses sleeves no one can tell. He’s really up front about it and talks about how he couldn’t get into the hobby or make the decks he likes if he had to pay for real cards.

      • MrValdez@lemmy.world
        link
        fedilink
        arrow-up
        7
        ·
        1 year ago

        There’s nothing wrong with proxying. It only becomes an issue if you’re playing in a tournament, or your opponent insist on using real cardboard since they probably spent a lot and so everyone should as well.

    • TwigTech@lemmy.world
      link
      fedilink
      English
      arrow-up
      13
      ·
      1 year ago

      Don’t forget commander, which a lot of places claim is now the most popular format. Pre-constructed commander decks can cost as little as $20-40 and competitive commander decks can easily go into the thousands.

      The game also has a very high skill ceiling. I think that’s one of the main reasons why magic has such a broad age range to its player base. There’s plenty of weird lines of play, from strange card / rule interactions to weird deck themes no one else would think of.

    • BeefPiano@lemmy.world
      link
      fedilink
      English
      arrow-up
      8
      ·
      1 year ago

      Isn’t “pauper” cheaper than standard?

      Also don’t forget that when the meta changes that expensive deck’s value can change (usually for the worse)

    • FauxPseudo @lemmy.world
      link
      fedilink
      arrow-up
      5
      ·
      1 year ago

      I quit playing in 1996. It wasn’t too rare to have a $2000 to $3000 deck even back then. And that’s when every card store had a Black Lotus for sale without having to notify their insurance company.

    • drudoo@lemmy.world
      link
      fedilink
      arrow-up
      2
      ·
      1 year ago

      I always felt like Modern was cheaper in the long run than Standard. Spending hundreds of dollars every few months on a new set didn’t speak to me. Whereas I could buy a few cards here and there to upgrade me modern decks.

      • furikuri@programming.dev
        link
        fedilink
        arrow-up
        1
        ·
        1 year ago

        I’d assume a lot of people sell/trade as the next set rotation is coming around no? I’m not sure how card economy works in magic but in yugioh today’s meta is tomorrow’s budget, surely there’s people that want to buy in play in non rotating formats

  • AggroKrab@reddthat.com
    link
    fedilink
    arrow-up
    37
    arrow-down
    1
    ·
    edit-2
    1 year ago

    I feel like games workshop table top games(e.g. Warhammer 40k) would fit in to this description if an individual had never heard of table top wargaming, or their reputation.

    They’re made of plastic? It can’t cost that much right!?!?

    but the rules, they can’t be too complicated? It’s just game !?!?

  • volvoxvsmarla @lemm.ee
    link
    fedilink
    arrow-up
    34
    ·
    1 year ago

    I am still amazed about how much money you can spend on making coffee at home. 300€ for a manual grinder - “that’s the cheao chinese stuff” wtf

      • volvoxvsmarla @lemm.ee
        link
        fedilink
        arrow-up
        3
        ·
        1 year ago

        Yeah because it apparently tastes like blueberries, moss and the left knee of Mussolini’s grandma after a late afternoon walk in the summer rain

          • volvoxvsmarla @lemm.ee
            link
            fedilink
            arrow-up
            3
            ·
            1 year ago

            I agree of course. It is just nice to have a variety and it is also worth the money to a degree.

            Although, I must say, I use rather cheap coffee (not more than 10€-12€/250g with the price resulting rather from fairtrade and organic labels than from it being high quality) if I want to make a milk based drink. I personally don’t think most of third wave/specialty coffee tastes good with milk. So using it on a latte macchiato seems like a waste to me.

              • volvoxvsmarla @lemm.ee
                link
                fedilink
                arrow-up
                2
                ·
                1 year ago

                In general, I personally don’t think milk and coffee go well together at all, to be honest. I don’t drink milk drinks often, but when I do, I add tons of sugar and sirup and consider it a dessert and not “coffee”.

    • Urbanfox@lemmy.world
      link
      fedilink
      arrow-up
      7
      ·
      1 year ago

      I’ve got a £1000 espresso machine and that the cheap one. We also have all the pour over shite - scales, grinder, gooseneck kettle, Hario… It adds up quickly.

      • volvoxvsmarla @lemm.ee
        link
        fedilink
        arrow-up
        7
        ·
        1 year ago

        And when you invite a bunch people over and tell them yeah we’re into coffee and they ask you for coffee and you’re like… Ok I am incapable of making coffee for more than 2 people in under 15 minutes, I need to pull out the senseo pad machine.

        • Urbanfox@lemmy.world
          link
          fedilink
          arrow-up
          6
          ·
          1 year ago

          Absolutely… someone at work was like, grab a coffee, see you in 5. Dude, it takes at least 15 minutes to make a coffee in this house.

          • volvoxvsmarla @lemm.ee
            link
            fedilink
            arrow-up
            3
            ·
            1 year ago

            We have a ROK and my husband once did 3 espressos for guests in a row, it did break his soul a little bit.

              • volvoxvsmarla @lemm.ee
                link
                fedilink
                arrow-up
                3
                ·
                1 year ago

                Thank you xD

                You know what the most painful part is? When your guests try the coffee and are like “aaah wow yeah that’s… nice! It’s really, uhm, intense” because they are so used to their crap coffee and don’t get the flowery berry fresh aroma of specialty coffee and you’re just smiling and dying inside. I mean I would have hated this kind of coffee 10 years ago myself so I get it but man…

                This is why I still have a senseo pad machine. I’m not wasting my time, energy and coffee to make fancy hand filter coffee or manual espressos for people who really don’t care (unless they ask for it, in that case, waste away).

    • BestBunsInTown_@lemmy.world
      link
      fedilink
      arrow-up
      1
      ·
      1 year ago

      Love coffee as a hobby for this reason. You can start with $20 to get simple pour over equipment or even nicer venas but you can go far and high with it eventually or stop at the $20

  • Idontoah@sh.itjust.works
    link
    fedilink
    arrow-up
    35
    arrow-down
    1
    ·
    1 year ago

    Rock climbing. To start out you basically just need $150 worth of shoes and some $5 chalk. Trad climbing or big wall climbing can be 5 figures and a dozen years worth of experience. And the skill ceiling is probably obvious, but it’s become an Olympic sport for a reason.

      • SheerDumbLuck@lemmy.ca
        link
        fedilink
        English
        arrow-up
        1
        ·
        1 year ago

        This is how a friend of mine got into ice climbing. They went to work as a glacier guide and got a avalanche training for free. They work to find their ice climbing hobby.

    • Fonzie!
      link
      fedilink
      arrow-up
      2
      ·
      1 year ago

      Bouldering here in the Netherlands can start pretty easily:

      • € 10-15 entry
      • € 5 to rent shoes, although you can bring any clean sport shoes yourself

      And that’s it!

      You can look into buying shoes and memberships if you’re really into it, but even then € 150 for shoes and € 40-60 a month for a membership is cheaper than my idea of an expensive hobby, like Magic the Gathering or PC building and gaming.

      • CompN12@lemmy.frozeninferno.xyz
        link
        fedilink
        arrow-up
        4
        ·
        edit-2
        1 year ago

        Short answer is probably not, it depends.

        If you have a printer set up and ready to go, it certainly can be. But for me to get a printer and all the fixings (printer, cure/wash station, resin, tent and ventilation for fumes) I was out about 700 Cad. And then you gotta get stls, some are easy others are way harder. Some of those are free and some are paid. And then I myself am paying for lychee pro, so that’s around a Netflix sub down the drain. Once that’s all clear there is the insane time investment. I can easily spend 30-60 min processing a job and prepping the printer for the next print. Finding, prepping an stl to print if everything is good can take as short as an hour, but can take much longer if things are hard to find, or if it’s a complex object to support. And then if you fail that print, all that time and resin (not too terrible, my large prints are like 5 bucks, small minis are under a dollar) is wasted.

        After all that, there is still things I plan to buy. I lack the patience to try printing void dragon c’tan, and there’s only one source that I could hope to buy a decent imotekh stl, and it’d be more expensive than buying the model (I regret buying it. That is the first and last time I ever get a finecast model).

        For me the fun is in the journey not the product. I’ve had a lot of fun printing my necrons. I don’t plan on playing in anything official, just friends so that angle isn’t an issue. I went into it wanting to take up 3d printing as its own hobby and I do not regret going this route, but building a single 2k army like I plan to is not worth it. Past that I imagine the savings will roll in, but I don’t really care for another army. Ethics wise I’m happy to vote with my wallet by diverting money to printing VS. paying for overpriced models.

      • Tathas@programming.dev
        link
        fedilink
        arrow-up
        3
        ·
        1 year ago

        I’m not sure if that’s viable for 40k. You might not be welcomed to play with fake minis. You could surely do that with friends though.

        My understanding is that you’re only allowed to play what you own, no stand ins.

          • Tathas@programming.dev
            link
            fedilink
            arrow-up
            1
            ·
            1 year ago

            Well, more pay to play.

            But if you want to participate in a battle with a large army, you need to have that army.

        • EmptyMusic@lemmy.blahaj.zone
          link
          fedilink
          arrow-up
          3
          ·
          1 year ago

          It is a bit more complicated than that. Basically, people you play with won’t care so long as you’ve painted it to a reasonable standard and there isn’t some massive size difference that’d give some notable advantage or disadvantage compared to official minis. The same is true of official ones where people are picky about unpainted plastic but its likely more a thing with printed ones. Independent game stores also won’t really give a shit since you’re likely buying paints and stuff from them anyway.

          GW stores are the ones that will have a problem with it, along with tournaments they host. I have heard stories of people getting shit for using forgeworld stuff (which is GW’s speciality site basically, they sell the really big models and some more niche like, regiment-specific stuff) in stores because it isn’t something the stores themselves will specifically sell. This is because of corporate policy though, no one wants to lose their job.

  • 🇰 🌀 🇱 🇦 🇳 🇦 🇰 ℹ️@yiffit.net
    link
    fedilink
    English
    arrow-up
    32
    ·
    edit-2
    1 year ago

    Warhammer 40k. I heard about the game years ago and thought it sounded pretty cool. Didn’t realize that unlike D&D, it’s not something generally played without minis. And it’s a massive war game. So you need a lot of minis. And it’s a massive war game. So you need to know how to strategize or you’re gonna suck. High cost and high skill.

    I just read the lore instead. 🤷🏻‍♂️

    • Cethin@lemmy.zip
      link
      fedilink
      English
      arrow-up
      3
      ·
      edit-2
      1 year ago

      Wargaming is something I’ve always wanted to try but don’t want to spend the time and money to actually try it. It’s just way too high of a barrier.

      There’s a cool game called Moonbreakers that has great model painting tools. I hope someday Warhammer 40k gets a tabletop accurate video game with model painting and everything. I can see why they wouldn’t, because it may take away from tabletop, but I’d bet it’d work the other way. It’d create a way for people to try it before committing that much to it, instead of seeing the barrier and backing out.

  • Lem Jukes@lemm.ee
    link
    fedilink
    arrow-up
    31
    ·
    1 year ago

    Probably more well known but with the whole ‘live edge’ fad from a couple years ago now, some people don’t realize you can spend upwards of 20-30k on a single piece of some types of raw lumber.

    • RagnarokOnline@reddthat.com
      link
      fedilink
      arrow-up
      13
      ·
      1 year ago

      I feel like woodworking is one of those traditional “this hobby is expensive” things, but I was shocked by just how hard it is to do some things (like hollow out a bowl-shaped divot in a piece of wood) without the proper tools. And the proper tool is sometimes a single hook knife that’s $89 dollars.

      You can get 8 foot of pine from any hardware store for $10, but if you want to do anything other than cross cut that pine to different lengths, you’re going to need to drop some cash.

      Of course, the skill ceiling for woodworking is enormous.

      • UsernameLost@lemmy.ml
        link
        fedilink
        English
        arrow-up
        9
        ·
        edit-2
        1 year ago

        Woodworking can get crazy expensive, but like most hobbies, you can get into it gradually for relatively low cost. I started with a cordless drill and a circular saw, then gradually bought used tools and restored them. If I were to buy everything new in my shop, it would easily be $15-20k, but I’ve spent maybe $2k over 5 years. The most I’ve spent on any one tool was a $400 miter saw a few months ago on sale, almost everything else has been stuff that’s older than me or inexpensive tools that work just as well as pricier options.

        Good hardwood is fucking expensive though. I found a local mill where I can get cherry for $4/bdft or walnut for $5.50/bdft (bdft = board foot, volumetric measurement equivalent to 12"x12"x1"). Somewhere like Woodcraft charges $15-18/bdft for walnut, which is $60+ for a 6" wide, 8ft long, 1" thick board.

        ETA: It does annoy me when every woodworking video comment section is bombarded with complaints about how expensive tools are. Yes, Sawstop and Powermatic are obscenely expensive. A DeWalt job site table saw is more than enough for most hobbyists starting out. So is a used saw you can get for $100 or less. It’s very easy to blow through $20k outfitting a shop, but it’s also very easy to outfit a shop with old, quality tools for a fraction of that price. This is what I’ve spent over five years

        • 6" Jet jointer from 1973: $240
        • 12" Parks planer from 1943-1986 (no idea on exact date): $200. Used a 13" Woodtek lunchbox planer for a few years before this. I got that for free because they don’t make linkage gears for it anymore, and I was able to 3D print replacements.
        • DeWalt job site table saw, new in 2018: $325
        • Wen drill press, new in 2019: $70
        • Wen scroll saw, new in 2019: $60
        • harbor freight miter saw, used: $80 (fuck this thing, would never cut square no matter how much I tried to tune it)
        • DeWalt compound sliding miter saw, new 2023: $400
        • Harbor freight lathe, new 2020: $150-200 (don’t remember exactly)
        • shaper from 1978 + $2k in tooling: $40 at auction
        • 7-10 various hand planes, all used from eBay or marketplace: $80
        • knockoff 14" delta bandsaw from late 80s: $40
        • harbor freight dust collector, new 2023 (gift): ~$250-300
        • slow speed bench grinder, new 2021: $90
        • various hand saws, 2016-2023: probably $100
        • various chisels, new 2016-2023: ~$120

        All in, $2,100 over 5 years. I sold ~$1,500 worth of random projects in that time, and gained a ton of enjoyment from it.

        Even if you do go big and spend a lot of money on tools, as long as you have disposable income and you’re not forgoing your/your family’s basic needs, there’s nothing wrong with spending money on things you enjoy. It’s ok to enjoy things.

        • RagnarokOnline@reddthat.com
          link
          fedilink
          arrow-up
          2
          ·
          1 year ago

          I hear you on lumber prices. Woodcraft near me ended up having a sale on some exotics around the holidays and I bought as much of it as I could afford. I justified it by making basically everyone I knew salt boxes as gifts.

          Otherwise, it’s hard to get ahold of gorgeous lumber without having a huge bankroll.

          • UsernameLost@lemmy.ml
            link
            fedilink
            English
            arrow-up
            3
            ·
            edit-2
            1 year ago

            It’s hard man. I was living in Alaska when I really got into woodworking, and I had one overpriced option for a really limited selection of hardwood. I managed to get some old maple flooring from a guy that was contracted to replace a basketball court, and got some old redwood from a water tower that was taken down, but otherwise I just used pine for everything for the first few years.

            Best advice I can offer is to find a local mill. Facebook groups are good for finding local people that just do it on the side and/or don’t have a website. Ideally, find someone with a kiln, or be prepared to wait for months to years for it to dry. You can also find some good deals at auctions and sometimes on FB marketplace

            The only wood I buy at Woodcraft nowadays is for small lathe projects when they have blanks on sale

            • RagnarokOnline@reddthat.com
              link
              fedilink
              arrow-up
              3
              ·
              1 year ago

              I’ve never gone to a mill or even a lumberyard (only some speciality stores from time to time), but I think I’m going to take your advice and look around.

              I tend to use the ol’ pine and plywood for most of my projects, but I want to get more into making furniture and getting a source now ain’t a bad idea.

              • UsernameLost@lemmy.ml
                link
                fedilink
                English
                arrow-up
                3
                ·
                1 year ago

                They’re generally a great experience. It’s way different than Lowe’s/HD, and generally better selection for cheaper than places like Woodcraft or Rockler. There’s typically a wide range in widths/thicknesses, so have a rough idea of what you need and be ready to mentally adapt your build if they don’t have as many wide boards as you need. Some places will have a minimum purchase requirement, but the few I’ve gone to don’t. Typically, I spend $200-400 for a trip, which covers a few projects for me.

                Added bonus of going to a mill instead of a distributor, sometimes they’ll have waste you can take for free/really cheap! Great for small projects or lathe stuff

    • Demonbooker@lemmy.world
      link
      fedilink
      arrow-up
      6
      ·
      1 year ago

      There’s a YouTube channel I saw a while back where the guy films the process of cutting slabs. When you take into consideration the sheer size of trees that have to be used to make a slab, and then the size of the equipment that has to be used, and the weight, it’s easy to see how the cost of even a clean grained slab can be through the roof, not to mention something that has artistic or desirable figuring in the grain.

    • Stern@lemmy.worldOP
      link
      fedilink
      arrow-up
      9
      arrow-down
      1
      ·
      1 year ago

      Comparably, Gunpla also goes hard on costs (though imo its more for associated materials like paint then the models themselves, which can be pricy but tend not to be.) and the quality of some of what folks put out there is staggering, as shown in the 10th Gunpla Builders World Cup

      • MajesticSloth@lemmy.world
        link
        fedilink
        arrow-up
        2
        ·
        1 year ago

        I appreciate that link, thanks. I have built a few, haven’t even painted though. I just like building stuff I don’t need glue for.

        Those builds remind me of a guy I worked with that back in the day would be a model builder for cars that the model companies hired to build the model for the box covers before they mostly started using photos of real cars. He was just so talented. Even bashed some kits so they could be molded to create new models for some companies. One of them was when they wanted an old woody station wagon so he basically took 10 different kits and created it for their mold.

  • southernbrewer@lemmy.world
    link
    fedilink
    arrow-up
    30
    arrow-down
    1
    ·
    1 year ago

    I’ll do the reverse - I think most people would expect homebrewing beer to be quite hard to get started with, but for $50 you can get everything you need to start making a really quite good beer, and save money at the same time (homebrewed beer is usually much cheaper than store bought)

    If you want to get started search for “brew in a bag” and buy a kit beer mix. You’ll need a handful of equipment like a brew bag and fermenter, but that stuff is really cheap.

    Then you can indeed go down a massive rabbit hole of refinements, but it just amazed me that the first beer you make will already be a good one.

    • Cethin@lemmy.zip
      link
      fedilink
      English
      arrow-up
      8
      ·
      1 year ago

      From my experience, it’s not that much cheaper, especially after considering time cost. One issue with it though is that you get a lot of the same type of beer, which isn’t totally bad but also somewhat puts a stopper on trying new beer. It’s great if you’ve got plenty of people to share it with though, but I don’t have enough that enjoy beer.